Fits 1970-1974 GM F-Body with Stock Spindles;1975 Firebird with Stock Spindles
The Baer “Tracker” adjustable tie-rods feature 6061 T-6 aluminum, fully machined sleeve with a black anodized finish, a Teflon lined 5/8” heim joint and 4140 steel pin which. The pin is machined with the correct taper so no modification to the OE spindles is required and then heat treated. The Trackers Tie Rods are vehicle specific, mounting to the OE inner tie rod and offer approximately .875” of adjustment at the spindle to help correct bump steer issues due to modified suspensions and/or poor OE design. Best of all these are made in the USA!
- Direct bolt on upgrade
- Black E-Coated for Rust Protection
- Fully adjustable
- Simple installation
- Tapered pin for NO spindle modifications
- Vehicle specific
Information:
There are 2 Factory Tie Rods on the 1975 Firebird. This Tracker is for early design with an OE outer end measuring 5.750" from the center of the bowl to the end of the tie rod.
Application Summary:
| Year |
Make/Model |
| 1970-1974 |
Chevrolet Camaro |
| 1970-1975 |
Pontiac Firebird |
| Attributes |
| Adjustable |
Yes |
| Adjusting Sleeve Included |
Yes |
| Adjustment Range |
0.875 |
| Applications |
1970-74 GM F-Body cars with stock spindles, 1975 Pontiac Firebird with stock spindles Note: There are 2 Factory Tie Rods on the 1975 Firebird. This Tracker is for early design with OE outer end measuring 5.750" from center of bowl to end of tie rod. |
| Axle |
Front, Front |
| Boot Color |
N/A |
| Box Count |
1, 1 |
| Brand |
Baer Brakes |
| California Proposition 65 |
WARNING: Cancer - www.P65Warnings.ca.gov |
| Castle Nut Included |
No |
| Category |
Steering |
| Color |
Black |
| Cotter Pin Included |
No |
| Country of Origin (Primary) |
US |
| Dust Boot Included |
No |
| Emission Code |
6, 6 |
| End 1 Gender |
Female |
| End 2 Gender |
Female |
| Export Description |
Suspension Components, Suspension Components |
| Finish |
Black e-coated, Black e-coated |
| Grade Type |
Premium, Premium |
| Greasable |
Yes |
| Grease Fitting Included |
No |
| Harmonized Tariff Code (Schedule B) |
8708.94.75 |
| Hazardous Material Code |
N |
| Head Drive Type |
Hex |
| Heim Joint |
Teflon lined 5/8” heim joint, Teflon lined 5/8” heim joint |
| Housing Material |
6061 T-6 aluminum |
| Includes |
2x Tie Rods, 2x Tie Rods |
| Inner Sleeve Thread Size |
11/16"x18 LH Thread, 11/16"x18 LH Thread |
| Life Cycle Status Code |
Available to Order |
| Locking Nut Included |
Yes |
| Manufacturer Restriction |
None |
| Mounting Hardware Included |
Yes |
| NAFTA Preference Criterion Code |
A |
| Outer Sleeve Thread Size |
5/8"x18 RH Thread, 5/8"x18 RH Thread |
| Part Type |
Steering Tie Rod End |
| Pre-Greased |
Yes |
| Product Line |
Steering Tie Rod End, Steering Tie Rod End |
| Product Type |
Bump Steer Kit, Bump Steer Kit |
| Quantity |
1, 1 |
| Reinforced |
Yes |
| SDR Required Flag |
N |
| Sleeve Length |
6.6, 6.6 |
| Steering Type |
Manual |
| Sub Category |
Steering, Gear and Related Components |
| System Notes |
5.75 inch eye of ball to end of sleeve, 5.75 inch eye of ball to end of sleeve |
| Thread Direction |
Right Hand Thread, Right Hand Thread |
| Tie Rod Material |
6061 T-6 aluminum |
| Tube Diameter |
5/8", 5/8" |
| Type |
Straight |
| Universal Or Specific Fit |
Specific Fit, Specific Fit |
| Warning |
California Proposition 65 |
| Warranty Time |
1 |
| Washer Included |
Yes, Yes |
| Weight |
3.135, 3.135 |
| GTIN |
00844165005018 |
