Fits 2007-2014 Toyota FJ Cruiser with 4.0L, 2.5-inch Cat-Back, Stainless Steel
The new Flowmaster® Flow FX® cat-back exhaust system for the 2007-2014 Toyota FJ Cruiser is manufactured using durable 409 stainless steel throughout and features 2.50-inch mandrel bent pipes for better exhaust gas flow, and a Flow FX "straight-through" muffler for great sound and maximum performance. The system is finished off with a 3.50-inch diameter black ceramic-coated 304S stainless steel tip, giving your FJ a custom look that goes hand in hand with that deep performance Flow FX sound. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. Backed by Flowmaster's lifetime Limited Warranty.
- This system produces a moderate rumble with minimal interior resonance
- Includes a large 3.5-inch black ceramic coated tip for an aggressive look
- Flow FX “straight through” performance muffler delivers a deep performance tone and improves exhaust flow
- Increases of up to 4 HP and 5 FT/LB over the stock exhaust
- Includes complete hardware and factory styled hangers in the stock locations for an easy installation
- 2.5-inch Mandrel bent 16 gauge 409 stainless steel tubing maximizes exhaust flow and improved durability
- Lifetime Limited Warranty
Application Summary:
| Year |
Make/Model |
| 2007-2014 |
Toyota FJ Cruiser |
| Attributes |
| Brand |
Flowmaster |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| CARB (California) Compliant |
Yes |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
FlowFX, FlowFX |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Diameter |
3.50, 3.50 |
| Exhaust Tip Finish |
Black Ceramic Coating, Black Ceramic Coating |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
1, 1 |
| Exhaust Type |
Cat-Back |
| Exit Position |
Single, Single Out Rear |
| Finish |
Natural, Natural |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Included |
No, No |
| Inlet Inside Diameter |
2.500 in |
| Inlet Type |
Flanged, Flanged |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
409 Stainless Steel |
| Mount Type |
Uses Factory Hangers, Uses Factory Hangers |
| Mounting Bracket Included |
No, No |
| Muffler Body Diameter |
4.00, 4.00 |
| Muffler Body Height |
4.00 |
| Muffler Body Length |
14.00, 14.00 |
| Muffler Body Length (in) |
14 |
| Muffler Body Material |
409 Stainless Steel, 409 Stainless Steel |
| Muffler Body Shape |
Round, Round |
| Muffler Color |
Natural, Silver |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Diameter |
2.50 |
| Muffler Inlet Diameter (in) |
2.5 |
| Muffler Inlet Inside Diameter |
2.50, 2.50 |
| Muffler Inlet Location |
Centered, Center |
| Muffler Inlet Outside Diameter |
2.63, 2.63 |
| Muffler Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Outlet Diameter |
2.50, 2.50 |
| Muffler Outlet Diameter (in) |
2.5 |
| Muffler Outlet Location |
Centered, Center |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Overall Length |
20.00, 20.00 |
| Muffler Overall Length (in) |
20 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
1, 1 |
| Muffler Series |
FlowFX, FlowFX |
| Muffler Shape |
Round |
| Muffler Type |
Absorption, Absorption |
| NAFTA Preference Criterion Code |
B |
| Part Type |
Exhaust System Kit, Exhaust System |
| Pipe Color |
Silver, Silver |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust System, Exhaust System |
| SDR Required Flag |
N |
| Series |
FlowFX Exhaust Kits |
| Single Dual |
Single |
| Sound Level |
Moderate, Moderate |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat-back |
| Tail Pipe Diameter |
3.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tail Pipe Quantity |
1, Single |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Cut |
Angle |
| Tip Diameter |
3.5, 3.50 |
| Tip Edge Style |
Rolled |
| Tip Finish |
Black Ceramic, Black Ceramic Coating |
| Tip Length |
7.5, 7.50 |
| Tip Logo |
Embossed, Embossed |
| Tip Material |
304 Stainless, 304 Stainless Steel |
| Tip Quantity |
1 |
| Tip Shape |
Round |
| Tip Style |
Single Wall |
| Tubing Diameter |
2.500 in, 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Type |
Cat-Back, Cat-Back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| GTIN |
00090127100585 |
